These Full Mortise Standard Weight Three Knuckle Concealed Ball Bearing Hinges are for medium weight doors receiving medium frequency service. They feature concealed bearings for trouble-free long lift application and an attractive slim barrel with flush pins and plugs. They are available in sizes 3.5″ x 3.5 Inch, 4″ x 4″ Inch, 4.5″ x 4″ Inch, 4.5″ x 4.5″ Inch, 5″ x 4″ Inch, 5″ x 4.5″ Inch, 5″ x 5″ Inch, and come in Satin Chrome, Stainless Steel, and Primed for Painting finishes. Additionally, the 3.5″ and 4″ hinges are available with square, 1/4″, and 5/8″ radius corners.
Product Specifications:
- Full Mortise Standard Weight Three Knuckle Concealed Ball Bearing Hinges
- Sizes Available:
- 3-1/2″ Inch x 3-1/2″ Inch:
- Height: 3-1/2″
- Width: 3-1/2″
- Material Gauge: .123 ± .005
- Standard Screw Size: FHMS – 10-24 x 1/2”; FHWS – 10 x 1”
- Corners Available: Square, 1/4″, 5/8″
- 3-1/2″ Inch Template
- 4″ Inch x 4″ Inch:
- Height: 4″ Inch
- Width: 4″ Inch
- Material Gauge: .130 ± .005
- Standard Screw Size: FHMS – 12-24 x 1/2”; FHWS – 12 x 1-1/4”
- Corners Available: Square, 1/4″, 5/8″
- 4″ Inch Template
- 4-1/2″ Inch x 4″ Inch
- Height: 4-1/2″
- Width: 4″
- Material Gauge: .134 ± .005
- Standard Screw Size: FHMS – 12-24 x 1/2”; FHWS – 12 x 1-1/4”
- Corners Available: Square
- 4-1/2″ Inch x 4-1/2″ Inch
- Height: 4-1/2″
- Width: 4-1/2″
- Material Gauge: .134 ± .005
- Standard Screw Size: FHMS – 12-24 x 1/2”; FHWS – 12 x 1-1/4”
- Corners Available: Square
- 5″ Inch x 4″ Inch
- Height: 5″
- Width: 4″
- Material Gauge: .146 ± .005
- Standard Screw Size: FHMS – 12-24 x 1/2”; FHWS – 12 x 1-1/4”
- Corners Available: Square
- 5″ Inch x 4-1/2″ Inch
- Height: 5 Inch
- Width: 4-1/2″ Inch
- Material Gauge: .146 ± .005
- Standard Screw Size: FHMS – 12-24 x 1/2”; FHWS – 12 x 1-1/4”
- Corners Available: Square
- 5″ Inch x 5″ Inch
- Height: 5″
- Width: 5″
- Material Gauge: .146 ± .005
- Standard Screw Size: FHMS – 12-24 x 1/2”; FHWS – 12 x 1-1/4”
- Corners Available: Square
- Finishes Available: Satin Chrome, Stainless Steel, Primed for Painting
- For medium weight doors receiving medium frequency service.
- Concealed bearing for trouble free long life application.
- Non-rising removable pin.
- Hole in bottom tip for easy pin removal.
- Attractive slim barrel with flush pins and plugs.
- May be used on fire rated openings
- All hinges are ANSI template
- Manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI)
- Hinge Swaging: A standard swaging of our standard weight full mortise hinge when closed to parallel position provides a 1/16” clearance between leaves
- Screws included
- Sold as 3 Pack
